Residential painting cost

Home improvement isn't a low-cost endeavor, but sure cheap comes will build a immense distinction within the look of the house. A paint job on either the interior or exterior is one such project. Get an plan of the value of a typical paint job so you'll be able to begin preparing to tackle this basic home project.

FOR MORE INFO: go to www.1855wannareno.com

Supplies required
When estimating the value of a typical paint job begin by making a listing of all the provides you will would like for painting. The first obvious value is for gallons of paint within the colours you would like further as primer paint for the primary coat. You also would like a range of brushes and rollers to complete the duty expeditiously. Other tools embody tarps to shield your article of furniture and floors, trays, painter's tape for edges, plaster for patching holes and scraping or sanding tools to sleek out surfaces. You should additionally purchase a protecting mask if you do not wish to inhale fumes.

Exterior Job Considerations
When doing associate degree exterior paint job you have many extra issues to stay in mind. In addition to the fundamental items, you also would like associate degree ladder. Exterior surfaces tend to be additional rough and more worn than interior surfaces due to the weather, so you might have to be compelled to obtain significant duty scraping and cleanup tools (like an influence washer) to arrange the surface. It's also best  an exterior paint job with a pal to identify you if you would like to induce on the ladder.

No Hiring professionals
The cost of a  paint job varies betting on the standard of painting provides you decide on to shop for. Expect to pay $12 or more per gallon of paint for interiors (about the same for primer). Exterior paint is usually costlier, at about $40 per gallon. One gallon paints about four hundred sq. feet of wall area, so divide the total extent of the wall by four hundred to see what percentage gallons you would like. Double that figure if you want 2 coats. Retailers sell painting kits that contain all of the other tools you need--including brushes, tray and scraping tools--for concerning $20. By these estimates, the total cost of painting an enclosed area of concerning 800 sq. feet (wall surface) with 2 coats and one coat of primer and basic tools is concerning $90 total. To paint the outside if a house with 3,200 sq. feet of surface space (eight gallons) with 2 coats, primer and basic tools is about $620 to $980 or additional. If you need to feature the value of associate degree ladder (about $200) and power laundry tool (minimum of concerning $70) the entire involves between $890 and $1,250 for an exterior painting job of that size.

Hiring Someone
Compare the typical cost of a paint job with hiring somebody to try to to the duty for you. If you hire somebody to paint an enclosed area of concerning a hundred and forty four sq. feet, you'll pay around $200 to $400 for the service. If you hire a contractor for associate degree exterior job, expect to pay from about $3,000 to $5,500 for a multi-level home. Though it's costly compared to taking on the duty yourself, it's also necessary to think about the time and energy you save by permitting knowledgeable to handle this work.

Insulation in Attics:Tips, Installation and Best Practices - 1-855-wanna-reno? Whitby,Oshawa,Pickering,Ajax,Toronto

FOR MORE INFO : go to www.1855wannareno.com

If you are AN environmentally acutely aware builder, you'll be wanting to think about putting in loose-fill insulation in AN attic. Loose-fill insulation is out there in an exceedingly few choices — fibreglass, polyose and rock wool — all of that contain recycled materials. fibreglass consists of just about a 3rd of recycled glass, spun into fibers. polyose is created from recycled, sliced paper and boxes that are with chemicals treated for hearth and mildew resistance. rock wool is created from scoria and rocks that ar recycled from industrial waste.

When put in properly, loose-fill insulation improves the energy potency of a home, lowers utility bills, and reduces fuel burning and greenhouse emission emissions. to make sure that householders reap these advantages, builders ought to follow manufacturers installation pointers and check for the following:

R-value A material's thermal resistance is measured by R-value. as a result of every of those loose-fill insulation materials incorporates a totally different R-value, you'll have to put in them at totally different densities so as to realize AN adequate level of insulation. you may conjointly ought to regulate for the number of subsiding that may occur over time and have an effect on the put in R-value. polyose loses two hundredth of its R-value, thus you must add twenty p.c a lot of in AN attic throughout installation. The subsiding share of fibreglass and rock wool is smallest and does not have an effect on thermal performance.

No gaps or fluffing If insulation is not put in at the correct density, voids and gaps will kind, decrease the R-value. Fluffing conjointly weakens the effectiveness of insulation. once insulation is fluffed, it's put in to minimum thickness however to not minimum weight needs, permitting air and warmth to suffer it.

Appropriate placement Loose-fill insulation works well in attics as a result of it is the most cost-efficient place to put in an outsized quantity of insulation. though you are covering an outsized space, you wish to watch out to not block ventilation and to stay insulation a minimum of three inches faraway from ceiling fixtures. Install baffles higher than side vents, and block soffits to stop wetness and mildew issues. check that ductwork is correctly sealed to stop insulation from current into the house.

Adequate drying check that the loose-fill insulation has enough time to dry before the drywall is put in. as an example, if polyose insulation isn't fully dry, it'll not meet R-value needs.
Loose fill is a good, environmentally friendly choice for insulating attics, as long as it's put in consistent with manufacturer's specifications.

1-855-wanna-reno? | Eavestrough : Could it damage our roof and foundation?

1-855-wanna-reno?  The object of the Eavestrough 

The primary job is to gather fresh water because it flows down your roof and so direct it to the downspout wherever it\'s harmlessly deposited your yard or into the storm sewer.

Water can forever follow the trail of effort. The gutters area unit put in at a grade to assist the water flow to the downspout. If this easy system is not operating properly, water will backup onto your roof. there\'s no easier thanks to injury your roof than to permit water to pool on prime of the shingles. If the shingles are not already broken by wind, weather and time, then having puddles of standing water on prime of them may be a surefire thanks to shorten their lifespans. this is often wherever correct maintenance of your gutters comes into play.

Nature working... 1-855-wanna-reno?

Mother Nature actually enjoys her cycles, and each year trees shed their leaves for winter so that they will grow them once more return spring. the bulk of the leaves fall to the bottom, however some fall onto the roof and into the gutters. The water currently has resistance to flow. once enough leaves constitute the gutter, it cannot continue with the flow of water and this could cause pooling.

It does not take long for leaves to fully impede water flow, and that they will even clog the downspout, which suggests no water is exploit the roof because it ought to. At best, the water currently flows over the sting of the gutters, which may be terrible for your foundation, however that is another article. At worst, the water currently flows the opposite manner and begins to pool on the roof. In winter time, this could cause Associate in Nursing ice dam, with every ordered wave of physical change and thawing shoving a wedge of ice deeper below your shingles.

Every year, I take a glance at my gutters. i am lucky therein I will see them through the windows of my second story, except for those in ranch vogue homes, then you\'ll ought to get out the ladder and create a visible review. do not wait till the gutters area unit fully clogged before cleanup. Instead, create it a daily a part of your yearly maintenance.

Some heavily timbered areas might needed cleanup a minimum of double each year.

Eavestrough cleaning . 1-855-wanna-reno?

If the gutters haven\'t been clean in a very long term, then the primary time goes to be back breaking work. you will need a combine of significant work gloves, a study ladder, trowel, box of garbage luggage and a minimum of one free afternoon.

Start on the corner of the house and set the open box of garbage luggage on the roof. Pull out one amongst the baggage and start to fill it with junk. If it\'s simply leaves, then use your hands. If the junk is significant and soaked with water, then use the trowel to dig out the junk.

Place it within the garbage luggage till they\'re concerning 0.5 full or fill plastic searching luggage instead. Throw down the baggage into the yard and choose them up once you are done. This keeps you from perpetually increasing and down the ladder. If the junk is lightweight, then the cleanup will not take long to try to to.

The eavestrough area typically neglected a part of yearly maintenance, however they directly contribute to the period of time of the roof,  not to mention your foundation, therefore you should consider always to keep them in good shape.

If you need eavestrough installation,leafguard, clean up or repair please contact us at www.1855wannareno.com 

follow us on www.facebook.com/1855wannareno or 

www.twitter.com/1855wannareno

Metal Roof ......good idea? | 1-855-wanna-reno ?

Metal Roof , another green alternative to reduce the contamination.  www.1855wannareno.com

Metal roofs are synonymous with strength and durability and are known to have a service life of 50 years and more therefore they are more environment friendly alternative. Your cost will be less in the long run and the level of contamination by avoiding asphalt will  be reduced.

These are some of the advantages that you have to consider before you install a metal roof:

• Metal roofs are lightweight--less than 1/3 the weight of asphalt and one twentieth the weight of concrete.
• A metal roof won't rot, crack, crumble, split, break or burn.
• Metal roofs are made from recycled steel and aluminum material and are 100 % recyclable.
• Metal roofs have coatings that prevent 75 to 80 percent of the sun's energy from being absorbed into the roof.
• A metal roof can reduce roof surface temperatures by 60 to 70 degrees.
• Metal roofs are available in a wide variety of styles and custom colors.
• Metal Roofing is durable and maintenance free.
• A Metal Roof increases a building's value.
• Metal Roofing is an ideal platform for integrating solar electric and solar thermal renewable energy solutions.

Whenever you decide to change your roof, you should think about this option www.1855wannareno.com

Wind the future source of electricity | 1-855-wanna-reno?

WIND GENERATORS        www.1855wannareno.com

Wind is free and with modern technology it can be captured efficiently. Once a wind turbine is built the energy it produces does not cause green house gases or other pollutants. Although wind turbines can be very tall each takes up only a small plot of land. This means that the land below can still be used. This is especially the case in agricultural areas as farming and grazing can still continue. Many people find wind farms an interesting feature of the landscape, views of wind turbines can be awe inspiring, to say the least.. Remote areas that are not connected to the electricity power grid can use wind turbines to produce their own supply. Wind turbines have a role to play in both the developed and third world countries. Wind turbines are available in a range of sizes which means a vast range of people and businesses can use them. Single households to small towns and villages can make good use of range of wind turbines available today.

In addition, wind energy can provide new sources of income in rural areas, as well as jobs for people who set up and maintain wind turbines or manage wind farms. Employment opportunities range from meteorologists and surveyors to structural engineers, assembly workers, and mechanical operators. Statistics show that every Megawatt of new wind capacity creates nearly twenty jobs.

Some of the concerns raised about wind turbines are not true. Wind turbines are not, as many people believe, dangerous to birds. A sliding glass door is more dangerous to birds than a small wind turbine. Wind turbines also have a very low potential to interfere with radio and television reception. All modern turbines, large and small, have blades made of fibreglass or wood. These materials are transparent to electromagnetic waves such as radio and television.

Your neighbours' concerns relating to wind turbine noise are important. No matter the size of the wind turbine, the potential for turbine noise to bother other people always exists. Even if a wind turbine does not emit enough sound to violate any noise regulations, the noise it produces may still be objectionable to other people.

The major challenge to using wind as a source of power is that it is intermittent and does not always blow when electricity is needed. Wind cannot be stored (although wind-generated electricity can be stored, if batteries are used), and not all winds can be harnessed to meet the timing of electricity demands. Further, good wind sites are often located in remote locations far from areas of electric power demand (such as cities). Finally, wind resource development may compete with other uses for the land, and those alternative uses may be more highly valued than electricity generation. However, wind turbines can be located on land that is also used for grazing or even farming.

Beside the disadvantages, we can conclude that this could be just another way to complement the energy generation plan of any country. Home wind generators can generate enough to reduce the pollution in the future. Something to consider because every single country is trying to get more energy to keep growing.

Lets go green! Help the planet...visit us www.1855wannareno.com

Are green homes a good invesment? | 1-855-wanna-reno.?

www.1855wannareno.com .....Lets help our planet!

According to a green home poll last year by TD Canada Trust, 72 per cent of Canadians are willing to pay more for a house or condo with environmentally friendly features. That statistic would seem to contradict the findings of the Leger poll. But take a closer look: Of these big spenders, more than three-quarters (77 per cent) are primarily motivated by savings on energy bills, with only 42 per cent appreciating the reduction of environmental impact. Green homes aren't necessarily selling to environmentalists; they're selling to the financially savvy.

As for the issue of availability, that one will resolve itself over time. Government standards are rising, builders are becoming more astute and consumers are gradually learning to view the initial premium as an investment. Eventually, purchasing an energy-efficient home will seem as natural as tossing an empty soup can into the recycling bin.

These days, with so many builders touting themselves as green, they can begin to blur together in the eyes of buyers. When a builder markets his homes as environmentally friendly because they feature water-saving toilets and high-efficiency gas furnaces, that's a problem: You'd be hard-pressed to find a new home without these features.

Given the choice of a home that meets minimum governmental requirements for environmental considerations and another that exceeds them, all other things being equal, most of us will choose the green home and feel good about it.

But the reality is that all other things aren't equal. If the greener home means more money at the outset, which it sometimes does, it might mean sacrificing square footage or high-end finishes. (or am i wrong?)

We know about all these green ideas but if  they don't have a development in our preferred location, chances are we'll move along to someone who does.

www.188wannareno.com     Follow us on Tweeter: @1855wannareno
                                                                 Facebook: facebook.com/1855wannareno 

1-855-wanna-reno? Asphalt shingles bad or good?

Ways to Help

• 
  

  Asphalt shingles are extraordinarily effective in the protection and appearance of millions of homes. However, when they are replaced, they can clog up landfills. These shingles have useful components that can be utilized again through and efficient and effective national recycling network. Here's some quick facts about asphalt roofing shingles

  • 12 million tons created annually
  • 11 million tons post consumer tear-off debris
  • 1 million tons of manufacturing waste
  • contractors spend $1billion yearly in waste hauling and tip fees
  • clog landfills, utilizing over 4% of all space
  • require several generation to decompose
  • include valuable and reusable asphalt content
  • asphalt content can be used for road repair and construction
  • 
    

  
  If asphalt shingles must be used on a project, buying the longest lasting asphalt shingles and buying no more shingles than necessary can help lessen the environmental impact of the project. If there are shingles left over when the roof is completed, they should be donated to Habitat for Humanity and similar programs.
  
  

  Reusing or recycling asphalt shingles reduces landfill mass and pollution. Recycling companies process asphalt shingles for use in hot-mix, which is used make and repair roads.
  
  
  

  www.1855wannareno.com

  
  

  
  

Solar energy....your next energy source

The sun has been producing vast amounts of power through nuclear fusion. This is the process by which four hydrogen atoms combine to produce one helium atom. This is the mechanism that the sun uses to generate its energy

The amount of energy from the sun that reaches the Earth is vast. All the energy that can be produced by the non-renewable reserves of the world like petroleum, coal, and natural gas is equaled by just twenty days of sunshine.

Although it disappears at night, it will surely be present the next day to provide more energy. It provides so much energy; in fact, the amount of sunlight that reaches the surface of the Earth in one hour is enough to meet the world's demand for energy for a whole year. Also, a 20 days' supply of sunshine is enough to match the world's reserves of conventional energy. And harnessing its energy for human use does not involve processes that emit harmful gases, unlike processes involved in producing energy from natural gas, coal, and oil.

 The benefits of using solar energy do not just end in the fact that it is free, reliable, clean, and renewable. Using it can protect much of our natural resources as well as preserve ecosystems that would otherwise be drilled and destroyed to collect oil or mine coal.

In fact, just a 1-kilowatt solar energy system that generates about 150 kilowatt hours of energy per month has tremendous potential to promote environmental sustainability. Such a system keeps about 170 pounds of coal from being burned, approximately 300 pounds of carbon dioxide from being emitted into the environment, and over 560 liters of water from being wasted per month. It also keeps sulphur dioxide and nitrous oxide from being released into the atmosphere.

We can help our planet.! Its your decision.....go green, invest in renewable technology

www.1855wannareno.com | go green with us !

Save energy and money..1-855-wanna-reno? wants to help you

1855wannareno.com | home renovation and interior decorating | siding | eavestrough | roof repair | painting | home staging

FOR HOMEOWNERS

1 Get an energy audit of my home — and act on the results. 
The Government of Ontario will help fund an audit and related retrofits to improve your home’s energy efficiency. Get more information from the Ministry of Energy and Infrastructure at www.homeenergyontario.ca 

2 Have my central air conditioning and furnace serviced. 
Use a licensed HVAC (heating, ventilation, air conditioning) professional to ensure maximum performance.

3 Clean my air conditioning unit’s condenser of dirt and debris. 

4 Clean or replace my furnace filter (especially, if I have central A/C). 
Change or clean it monthly through the summer and every three months in winter. 

5 Install a programmable thermostat. 
A properly set programmable thermostat can reduce heating and cooling costs by up to 10 per cent. 

6 Improve the insulation of my home. 

7 Reduce air leaks in my home. 
Caulk around windows, apply good quality weather stripping around doors, and install foam gaskets behind the cover plates of lighting fixtures, wall switches and receptacle face plates, especially on exterior facing walls. 

8 Sign up for peaksaver® (if available where you live). 
Allow your utility to turn down your air conditioner for short periods during hot summer weekdays when the demand for electricity is high. (Visit everykilowattcounts.ca to find out more about the program and the cash incentives). 

9 Right-size your refrigerator. 
Even an energy-efficient model can’t give you maximum savings if it’s too big for your needs. 

10 Get rid of my old energy-guzzling second fridge. 
Take advantage of the Great Refrigerator Round Up! (Visit everykilowattcounts.ca to find out more about the program). 

11 Upgrade to ENERGY STAR® windows. 
This change could reduce overall annual energy costs by up to 12 percent. 

12 Install a solar or tankless/instantaneous hot water heater. 
This change will dramatically reduce water heating costs. 

13 Install solar photovoltaic (PV) panels on the rooftop. 
You might even produce more energy than you can use. 

14 Install a ground-source heat pump. 
You can produce at least two-thirds of the energy needed to heat your home this way, meaning savings of 30 to 70 per cent off your home heating costs. 

15 Get a pool pump timer. 

16 Make sure I have a thermal pool blanket. 
A blanket will reduce heat loss and water evaporation. 

17 Consider solar panels to heat my pool. 
Solar panels can heat your pool very cost-effectively.  

18 Specify that I want my new home to meet ENERGY STAR® standards. 

19 Landscape for energy savings. 
Plant coniferous trees on the north side to protect from winter winds. Plant deciduous trees to shade the south-facing windows in the summer. 

---

FOR EVERYONE AT HOME

20 Use EnerGuide (Natural Resources Canada) ratings. 
These ratings can help you make purchasing decisions about energy-efficient appliances, heating and cooling equipment, and even vehicles. 

21 Fight phantom load – unplug electronics that draw power even when they’re turned off. 
This includes TVs, cable TV boxes, clocks, microwave ovens and any items using "power cubes" (such as handheld vacuums and baby monitors). 

22 Upgrade to ENERGY STAR®-qualified appliances. 
Look for ENERGY STAR® entertainment products too. 

23 Adjust the water level on the washing machine. 
Match the water level to the size of your load. 

24 Wash only full loads of laundry. 
And, better yet, use only cold water 

25 Do my laundry on evenings and weekends. 
Electricity demand is lower at these times. 

26 Hang my clothes outside to dry. 
Your neighbours might be inspired to follow your great example! 

27 Clean the lint out of my dryer after each load of laundry. 

28 Use a toaster oven or microwave instead of the oven, whenever possible. 

29 Opt for an electric frying pan instead of a range top. 

30 Try slow cooking. 
It actually reduces energy use even though cooking times are extended. 

31 Use pots with tight-fitting lids. 
Your food will cook faster. 

32 Use the oven light to check on my food instead of opening the door. 

33 Use an automatic shut-off kettle. 

34 Always set my dishwasher to air dry and only run it when full. 

35 Allow hot food to cool before placing it in my refrigerator. 

36 Thaw my frozen foods in the refrigerator. 
This can reduce spoilage and even help keep the fridge cool. 

37 Vacuum my refrigerator coils to keep them efficient. 

38 Use the oven’s self-cleaning option after cooking. 
You can take advantage of the existing heat. 

39 Make my showers shorter to use less energy and hot water. 
Showers use much less water than a bath! 

40 Install low-flow toilets. 
You’ll save on water use and on the energy needed to pump water. Look for rebates at guelph.ca/water

41 Rinse my dishes in a tub of clean water. 
It uses more energy to run them under hot running water. 

42 Fix dripping faucets, especially leaky hot water faucets. 

43 Insulate around my water pipes. 
Wrap the first metre on cold water pipes and the first two metres on hot water pipes running to and from the tanks. 

44 Install a water heater jacket and low-flow faucet aerators. 

45 Use a manual lawn mower. 
You’ll save energy and get some exercise. 

46 Open a window or use ceiling fan. 
Often air conditioning isn’t really needed. 

47 Set my air conditioner at 25°C when I’m home and 28°C when away. 
You can even turn it off if you’re not going to be home. 

48 Set my heat/thermostat at 20°C when I’m at home and 18°C overnight. 

49 Install solar reflective film on my windows. 
Use it on southeast, southwest and south facing windows to keep the sun’s heat from entering. 

50 Use insulated drapes or energy-saving cellular / honeycomb blinds in the winter 
They help to keep the heat inside your home. 

51 Use drapes/blinds, awnings and shades in the summer to keep the heat out 
And close them when you’re going to be out of the house. 

52 Turn off the monitor if I’m not going to use my computer for more than 20 minutes. 

53 Turn off both the monitor and the CPU if I’m not going to use it for more than 2 hours. 

54 Turn off your screensaver. 
It doesn’t save energy! Or your screen. 

55 Use power bars with on/off switches, automatic shutoff, or integrated timers. 

56 Replace my high-use incandescent light bulbs with ENERGY STAR®-qualified compact fluorescent light bulbs (CFLs) wherever it makes sense. 
They use up to 75 per cent less electricity and last up to 10 times longer. 

57 Install dimmer switches and use dimmable CFLs. 

58 Use task lighting. 

59 Place floor lamps or table lamps in corners. 
The light will reflect from both walls, making the room brighter without additional lamps. 

60 Install motion sensors to turn off lights automatically. 

61 Keep all air registers/radiators free of obstructions that impede air flow. 
Have your ducts cleaned annually. 

62 Use LED (light emitting diode) seasonal / celebration lights. 
Traditional incandescent lights use more energy. 

63 Use solar-powered outdoor lights. 

---

FOR PARENTS AND CAREGIVERS

64 Teach my children good energy conservation habits. 
Habits are formed early, so set a good example. 

65 Think of ways to reward my kids for good conservation habits. 

66 Choose games and toys for my children with energy use in mind. 

---

FOR KIDS - OF ALL AGES

67 Turn off the lights whenever I leave a room. 

68 Decide what I want before opening the refrigerator door. 

69 Turn off televisions, computers, and game consoles when I’m finished using them. 

70 Ask my parents about other ways I can help conserve.  

---

FOR TRAVELLERS

71 Put my indoor and outdoor lights on timers. 
Don’t leave your lights on 24/7 while you’re away. 

72 Put my water heater on the vacation setting, if it has one. 

73 Choose green-rated hotels when travelling for business or pleasure. 

74 Pull the plug on my battery chargers. 
Laptops, cell phones and digital cameras always draw power if they’re plugged in. 

---

AT SCHOOL - TEACHERS

75 Make energy conservation a classroom commitment. 
Incorporate conservation into your lessons wherever and whenever possible. 

76 Appoint a classroom energy monitor. 
Getting students involved gets them motivated. 

77 Take advantage of daylight. 
Use natural sunlight when possible and turn lights off when classrooms, gyms and auditoriums are not in use. 

---

AT SCHOOL - STUDENTS

78 Encourage my school, college or university to take conservation seriously. 

79 Be a role model for good conservation. 
You have the power to influence classmates, friends and family. 

80 Make my school leadership aware of energy waste, wherever and whenever I spot it at school or on campus. 

---

AT WORK - EMPLOYERS

81 Train myself or an employee to become an Energy Conservation Officer. 
Making conservation someone’s responsibility will set your business on the path of saving energy. 

82 Participate in an OPA commercial demand response program. 
Your company can benefit even more from your efforts to conserve. Learn more at everykilowattcounts.ca. 

83 Organize conservation learning opportunities for the people who work with me. 
Educate and encourage employees who identify and implement energy savings. 

84 Reward the people who work with me for their innovative, money-saving ideas. 
Celebrate the implementation of successful energy efficiency measures. 

85 Ensure meeting rooms are equipped with light switches. 

86 Install light emitting diodes (LEDs) in suitable 24-hour-use locations. 
Consider them for elevators, hallways and parking garages. 

87 Replace my incandescent or fluorescent EXIT signs with LED EXIT signs. 

88 Install high-quality electronic ballasts along with T8 florescent tubes. 

89 Install new high-performance chillers. 
This will improve the performance of your building’s air conditioning system. 

90 Use modular load control technology. 
This technology can reduce energy use by briefly cycling off electricity demand. 

91 Install effective automatic door closers. 
Doors can’t save energy if they’re not closed! 

---

AT WORK- EMPLOYEES

92 Turn off meeting room lights when not in use. 
In the summer, unnecessary lighting can increase air conditioning load. 

93 Dim, turn off or remove lights near windows in the daytime. 
Use efficient task lighting where needed. 

94 Use the stairs instead of taking the elevator, if I am able. 
It not only saves energy, it’s good exercise. 

95 Unplug coffeemakers, toasters and microwaves. 
Make sure they’re unplugged on weekends and before shutting the office down for the holidays. 

96 Keep entrance doors closed. 

97 Use the revolving doors into my office building. 
Revolving doors keep heat and cool air inside. 

98 Use standby mode for computers and copiers. 
These tend to be in use only a fraction of the time they are turned on. 

99 Turn all equipment off at the end of the day. 
This includes lights, copiers, computers and computer monitors. 

100 Use paper-reducing strategies. 
Consider double-sided printing, re-using paper, and using e-mail instead of mailing or faxing documents.